This video demonstrates how to install the Leviton TSL06 Toggle Slide Dimmer.
Always follow the wiring instructions and diagrams provided with the product, and if you are unsure or uncomfortable working with electrical wiring, contact an electrician. Please watch the video in full when beginning to install.
To install the Leviton TSL06 Toggle Slide Dimmer, first turn off power at the circuit breaker and confirm with a voltage tester. Identify and label the hot wire, then ensure the wiring matches a single-pole setup. Prepare wires by straightening and stripping them, then connect ground to the terminal marked “GR,” hot to “BK,” and load to “RD,” leaving the red-insulated screw covered. Set the bulb selector to Mode A for LED/incandescent or Mode B for CFL. Carefully push wires into the wall box, secure the device with mounting screws, and attach the wall plate. Restore power, test the dimmer by moving the slider to the highest position and toggling the switch up. If lights don’t turn on, refer to troubleshooting. For more details, visit leviton.com/dimmers.