The DW4BC and D2SCS Controllers features the ability to configure each button to run an activity, toggle a light, control multiple lights, switch between the Home and Away modes, or trigger an IFTTT event. 

Please note that all four buttons of the DW4BC can be configured. 

Only the top three buttons of the D2SCS can be configured.  The bottom button can only be used to toggle the light to which it it connected.

Before starting it is recommended that you Check and update the firmware on your Decora Smart® Wi-Fi device.

On the My Leviton Devices screen tap the ⋮ in the upper right corner of the controller's device card, select Settings, and then Reconfigure Buttons.

Choose the button you would like to configure and then choose what you would like the button to do when pressed.  

• Run an existing scene
• Create a custom scene
• Select a single device to toggle on or off
• Change your status between home and away
• Trigger an IFTTT applet

If you want a button to run an existing scene:

• Tap the button you wish to program
• Select the "Run a Scene" option
• Select from your existing scenes which one will run when the button is pressed
• Select Save

If you want a button to toggle a single device then:

• Tap the button you wish to program
• Select the "Toggle a Device" option
• Select from your existing devices the one you would like assigned to this button
• Select Save 

If you want a button to toggle between Home and Away:

• Tap the button you want to program
• Select the "Home or Away" option
• The button will be renamed "Home / Away"

If you want to program a button to be a trigger for an If This Then That applet:

• Tap the button you would like to program
• Select the IFTTT option 
• Follow the in-app instructionst to set the button as a IFTTT trigger
• Select Save

To reprogram the buttons tap Reset Button Configuration, then tap Yes, Proceed